TORQUETRAK计算器

Binsfeld 的 TorqueTrak 革命计算器用于设置 TorqueTrak 革命遥测系统。 使用计算器确定满量程扭矩和功率测量值。使用与您所需的测量单位相对应的计算器。 有关这些计算器背后的方程式的更多信息，请参阅 TorqueTrak Revolution页面上相应用户指南的附录 B。

Nominal Torque Range


mm
mm (enter 0 for solid shaft)
(4 for full bridge)
(supplied with gages)
N/mm2 (206800 for steel)
(0.3 for steel)
Scale Revolution Power Range
Optional


N·m
kilowatt
Set RPM switches in MCU to this value kW (coresponds to 20 mA output)
NOTE: The Actual Full Scale Power is slightly different than the Desired Full Scale Power value because the RPM Factor is rounded to the nearest whole integer.
Torque & Power Conversions
kW
RPM
N-m
RPM
Equations


`"Full Scale Torque", T_(FS)=(pi*E*(D_O^4 - D_I^4))/ (GF*N*(1+v)*D_O*4*10^6)`
`"RPM Factor"=(P_(fs)*9550)/T_(fs)`
`"Power (in kW)"=(T * "rpm")/9550`
`1 " hp" = 0.746 " kW"`
Scroll to Top